SW900 and keyswitch

[DaviddBro]

Hey guys so i wanted to ask if its possible to connect a key switch to the SW900 Display what i mean by it is like when i turn on the Key witch to the on position the Display will Turn on without the need of pressing the Middle M Button to power on the display so i wanted to know if its possible to connect the wires or something to make the display power using the key switch
Here is the SW900 Wire Diagram
Red Line (D+): Power Positive
Black Line (GND): Power Negative
Blue Line (DS): Controller’s electric door lock
Brown Line (DD+): Lighting control’s Positive ( If the controller’s software and hardware support lighting control, do not need connect this line)
Green Line (RX): Receiving communication
Yellow Line (TX): Sending communication
White Line (GND): Lighting control’s Negative


the key switch has red and blue wires i did try connecting to same red and blue here but it doesn't turn on the display but it does power on the bike

 

[RepairsDoneBest]

You need to have the key switch run in series with the red wire from the display. The key needs to be in the "on" position before you can turn on the display in this configuration. I wire all of my bikes like this.