test for faulty bms

[randomlight]

I have done some searching but can not find out how one would test to see if a bms is faulty. If someone could direct me to someplace where I can read about this or just tell me what the proceedure is I would very much appreciate it . thanks

350 watt
36v 10ah li-mn

 

[dnmun]

do you have the BMS out and can take a picture? do low res since i am on dialup now.

does it have a manufacturers label on it?

 

[randomlight]

Thanks for the response dnmun, sorry I didn`t get back sooner but I was out of town for the weekend.
All of a sudden my battery isn`t cutting out any more.One of three things I did corrected the problem but I don`t know which one it was.
I took off what I considered to be the bad cell and then ended up resoldered it back on.
I tried to bypass the bms but it didn`t work so I ended up splicing the wires back together where I had cut them off.
I loosend off the rear brakes because they seemed to be rubbing the tire where I have a slight wobble.
Go figure... I`m just happy to be riding again.Thanks dnmun and thanks to all the people who offered advice in my earlier post.