three speed switch not working through Cycle analyst

[beoutside]

I am setting up my CA V3 with throttle and three speed switch connected to my CA. As I toggle my three speed switch I am not getting any different displays?

 

[beoutside]

I am setting up my CA V3 with throttle and three speed switch connected to my CA. As I toggle my three speed switch I am not getting any different displays?

throttle seems fine
both worked when just ran through lyen controller

 

[beoutside]

I am setting up my CA V3 with throttle and three speed switch connected to my CA. As I toggle my three speed switch I am not getting any different displays?

throttle seems fine
both worked when just ran through lyen controller

kust figured out I needed to turn on or enable the aux port and set it for three options thanks !

 

[beoutside]

okay I now have the switch working with three presets for my cycle analyst V3
15 mph , 20 mph and 25 mph.
I have also set the power at 300 watts, 500, watts and 810 watts, for each speed or setting. I am running a 54 v 15 ah battery on a 48 V hub
this is on a cargo bike and I have no idea what the wattage settings will do,
any input appreciated.
I am only asking since it states right in the manual not to use speed as a setting for the limiting factor on my three preset settings for my three speed switch ? Thanks !