tsdz2 fitting in shimano ep8000 frame

[pxl666]

hey
i can purchase this frame for cheap and im thinking of fitting tsdz2 in the motor mount . anybody done something similar ? battery fits nicely

Shared album from zespół 📸

Tap to view!

photos.app.goo.gl

 

[marvin78]

looks like you're better off looking for tsdz3 somewhere ( not that I know, or even expect it to line up with the mounting holes, got no idea what frame that is )? But I recon it would minimize adaptation starting from a frame fit?

 

[Matze_Senpai]

if i were you i would try to fit a better motor on that frame like a bafang m600

 

[marvin78]

I only now notice the thread tittle gives me the friggin frame ...

Why not try one of those fancy EP8's? ( edit I guess because besides the review which popped up, I can't find any for sale and considering the prices of what is it meant to replace it's going to be expensive ).

 

[pxl666]

if i were you i would try to fit a better motor on that frame like a bafang m600

they cost way more and for I see now they are not easy to change settings if even possible...

 

[clix]

Someone had similar idea, but fited M600 instead of tsdz2:

Teaser for Shimano to Bafang M600 conversion 🤫

Just a teaser. Fully explaining all details when ready for shipping 😊 Shimano E6100/E7000/E8000/EP8 [Frame] to Bafang M500/M510/M600 [Motor]

www.emtbforums.com

 

[Waynemarlow]

Heres my E10 fitted with a TSDZ2 motor ( the M600 now fitted wasn't available ). Its possible but for the additional cost of say a M510, the amount of work needed to make up the adaptor is just not worth the effort.

The M600 is about to be replaced with the M560 and the M510 v3 puts out nearly the same power and both now have good customisation available. If you can find a M600 with one type of controller ( ver 46.2 ), it too can be customised using the BEEST tool.

 

[pxl666]

Heres my E10 fitted with a TSDZ2 motor ( the M600 now fitted wasn't available ). Its possible but for the additional cost of say a M510, the amount of work needed to make up the adaptor is just not worth the effort.

The M600 is about to be replaced with the M560 and the M510 v3 puts out nearly the same power and both now have good customisation available. If you can find a M600 with one type of controller ( ver 46.2 ), it too can be customised using the BEEST tool.

this looks very good . what u mean in terms of controllers ?

 

[tim565484]

That is awesome!

 

[pxl666]

it's done

rama e8000 to ts/bafang

35 new items added to shared album

photos.app.goo.gl