banshee28
100 mW
- Joined
- Jan 16, 2020
- Messages
- 42
Hey guys, need some help here!!
So, I upgraded my fat tire bike with all new components: 52V 21Ah battery, 35A controller, Color LCD, 750W Bafang rear Hub, throttle, etc. Everything was working good for a month or more across all terrains, no issues!
Last ride, I rode in some heavy beach sand areas and had some low speed areas where I used full throttle at very low speed. I think this may have really been a bad idea, but it seemed to handle this fine on previous rides.
I did look down at the LCD at times and notice 1200-1500 or so watts showing so i know at brief times it was working hard.
Anyway, during this ride the motor and LCD eventually turned off and would not turn back on. I peddled home and let it cool down. Still no power. Nothing seemed hot or burnt at the time. I disconnected the battery to the controller and let sit overnight.
The next day, I try to plug things back in and quickly heard a sizzle and seen the battery terminals turn black while plugged in to the controller!! I also notice while pushing the bike backwards there seems to be a slight more resistance in the motor.
So I would like some help here on the possible issue. Did I overload or burn out the motor, controller, battery, hopefully not ALL of them, LOL
Any suggestions on how to check things out?
So, I upgraded my fat tire bike with all new components: 52V 21Ah battery, 35A controller, Color LCD, 750W Bafang rear Hub, throttle, etc. Everything was working good for a month or more across all terrains, no issues!
Last ride, I rode in some heavy beach sand areas and had some low speed areas where I used full throttle at very low speed. I think this may have really been a bad idea, but it seemed to handle this fine on previous rides.
I did look down at the LCD at times and notice 1200-1500 or so watts showing so i know at brief times it was working hard.
Anyway, during this ride the motor and LCD eventually turned off and would not turn back on. I peddled home and let it cool down. Still no power. Nothing seemed hot or burnt at the time. I disconnected the battery to the controller and let sit overnight.
The next day, I try to plug things back in and quickly heard a sizzle and seen the battery terminals turn black while plugged in to the controller!! I also notice while pushing the bike backwards there seems to be a slight more resistance in the motor.
So I would like some help here on the possible issue. Did I overload or burn out the motor, controller, battery, hopefully not ALL of them, LOL
Any suggestions on how to check things out?