V7 controller ignition wire

[drive charge]

Hello guys, tnks for the forum and kind way I people always respond to quarries, ples I hava a v7 controller I want to identify the ignition wire from the controller, because after connecting it to the E-Bike, when I put the key, an turn on the ignition the light will have power of I turn the light switch on and the break light too, pluse horn will all be active if I touch there button,

But the display will not come on and the bike will not move, why and what could be the cause pls. Any one can help me out

 

[drive charge]

 

[drive charge]

How do I identify the ignition wire to power the controller to wake up

 

[amberwolf]

Is the display one that came wiht the controller? If not, it may not be compatible, and so it's wiring won't allow it to turn on the cotnroller.

Normally battery power goes from the controller to the display, then the display's power button turns on an internal tiny switch to send battery voltage back to the controller to turn that on.

In order for us to help you with the ignition key / lighting /etc wiring vs controller wiring, you'll need to provide a drawing of the specific wires on each part you have, noting those already connected and working, what each one is for. If possible also the voltage it carries.

If you don't have a diagram of what the wires on your controller are for, then at least a clearer image of the wiring of the controller with them separated from each other visually so that they can be guessed at more easily.

The controller purchase page link may also help us help you figure things out, as they often have images or links to info that helps.

The "v7" is probalby just a version number. Not knowing what manufacturer and model it is means we don't know what to look up to help you, as wiring is not standardized so any wiring diagrams from other controllers may not apply to yours and could result in destroying parts by wrong wiring.

 

[drive charge]

 

[E-HP]

View attachment 381550

That’s just a closeup of the same mangled mess of wires. Here are instructions on posting useful information and pics.

Troubleshooting sticky (work in progress)

Purpose: This thread includes some tips on what types of information to provide in order to receive prompt advice, and the level of detail ideally available to diagnose the issue. Ebike troubleshooting requires information that in most cases, only the requestor can provide or has access to. The...

endless-sphere.com

Here’s a note in my newbie FAQ (link in my signature) on the ignition:

• Electric Key Lock/Key Switch/Electric Door Lock/Ignition/Power Lock/Controller Power Wire : Controller on/off; usually applying battery level voltage to the signal wire turns on the controller (frequently a thin orange conductor).

Note that there are no standards for wire colors in Chinese controllers, so frequently doesn’t mean always.