Jay64
100 kW
So what controllers have you guys been using for the Turnigy 80-100s?
Thud said:But where do you fellers start? between each phase, or centerd on each phase of the DLRK pattern.
It depends what you mean by high power , Im still pretty confident that there will be no problems and be reliable upto 7kw, but I am basing this on my smaller motor so time will tell. The auto adjusting timing tool of burties may well be a good fix if this is indeed the problem.drewjet said:Hmm, first I hear of this outside halls not working well in high power siuations. That's not good news.
Burtie said:Maybe fit two sets of sensors to a motor, 1 set between the phases and 1 set at the centre of the phases, so that a performance comparison can be made
Burtie
gwhy! said:Im gonna start with my existing 17.1 spacing, I think the real problem with working out what is really going on is trying to monitor the phase/hall signals under high current conditions (80A +) this is what has been holding me up. We/I need a way of loading the motor to draw these sort of currents but also be in a position to stick the scope on some test points.