Wire colors for nine continents hub to crystalyte controller

[bumpyrider]

Hello,

can someone please check on their bike and tell me the color diagram for the NC hub and the Xlyte controller?

i have matched the hall sensor colors,
yellow,
black,
blue,
green,
red

and tried the phase

blue - blue
green - green
yellow - yellow

and i tried inversing blue and green

i would try the 36 combinations, but i think that i may have the hall sensors wrong.

Thanks!

 

[chvidgov.bc.ca]

I might try swapping the yellow and blue. That's what worked on my Infineon/Fusin motor combination.

Red Red
Black Black
Green Green
Yellow Blue
Blue Yellow

 

[bumpyrider]

okay, so do you think that the hall colors should be swapped round as well as the phase colors?

anyone have a sure answer?

 

[Icewrench]

okay, so do you think that the hall colors should be swapped round as well as the phase colors?

Yes very likely. Usually inside the controller the phase and hall wires follow the same pattern.

 

[bumpyrider]

Solution for NC and Xlyte ctrlr: swap the green and blue on the Hall *and* the Phase... then it goes backwards. so turn the xlyte foward/reverse key.

i didnt even know the key was for reverse, i thought it was for locking the bike. So i picked it with a trumbone paper clip. have to make a little v shape to get round the middle of the key, and push it firmly with pliers and presto don't need a key.

 

[c9tech]

Crystalyte --> 9 Continent

Hall
yellow --> green
blue --> yellow
green --> blue
red/tan --> red
black --> black

Phase
yellow --> blue
blue --> green
green --> yellow