XTreme Green Sentinel PMV - 3 wheeled Chariot

[Dacflyer]

Just poking in the dark here, Does anyone happen to have any of the electronic modules for this unit ? I think the module that sends data to the dash panel has died on mine, The panel lights up, but no data is displayed. Battery volts = 0 , Amps- 199.9 , Speed =0 Cell volts - 0
Would be nice if i had a way to connect to the CAN BUS system and see what info there is. Not sure if it lost programming or if module is bad.
I did get the motor rebuilt and working. Now the dash panel is out,.
was hoping to get it fixed up to sell..

 

[amberwolf]

Most of the time communications failures are caused by wiring problems--either a wire has broken (usually right at the point it enters the contact in the connector) or other connection problem exists (wire broken right at solder pad on PCB). Sometimes it's a transciever chip failure, usually on the transmission end.

 

[Dacflyer]

I have checked all cables and connections,,Not able to check the boards themselves, they are potted..
I wish there was a way to connect to the CAN BUS and see what there is to see.. but without the program, There is nothing i can do.

 

[Dacflyer]

BUMP... Still hoping to finding info...
or can anyone recommend something that will replace the dash board with something that will work ?

 

[Dacflyer]

BUMP >>> Still Looking...