Hello everyone!
I've a 350W geared hub motor which I had to replace the gears mechanism on after only 3000KM because the freewheel got stuck (only rotated with the motor). I guess this could be happening because there's a startup "kick" when the motor starts with too much acceleration.
I use a 48V battery and the controller is KT26-60ZWSRMD with KT-LCD3.
So my question is if it's possible to adjust the controller so that it starts more smoothly with less acceleration.
There appears to be no KT-LCD3 parameters for startup acceleration or the PID loop.
If not adjustable I wonder if the sine-wave version of a similar KT controller has more smooth startup.
I've a 350W geared hub motor which I had to replace the gears mechanism on after only 3000KM because the freewheel got stuck (only rotated with the motor). I guess this could be happening because there's a startup "kick" when the motor starts with too much acceleration.
I use a 48V battery and the controller is KT26-60ZWSRMD with KT-LCD3.
So my question is if it's possible to adjust the controller so that it starts more smoothly with less acceleration.
There appears to be no KT-LCD3 parameters for startup acceleration or the PID loop.
If not adjustable I wonder if the sine-wave version of a similar KT controller has more smooth startup.