999zip999
100 TW
My muxus 3,000 turbo 4t and powervelocity 18fet bt controller at 70amps and 80v from 24s A123 20ah. So 5,600 watts. Matched with a sunryno lite 26in rim - rim brakes kool- stop and regen. The tires are the new maxxis gypsy silk ebike tire that has moped on the side. Speed rated. Then the thick slime tube.
The tire moved on the rim by 10in backwards or thru acceleration. Ok. This time a small whole on the inne side close to the rim. Rim tape good no ruff edges. But most times I rip next to the stem. Yes have filed smooth.
Is there a way to keep the tire from moving on the rim ? Powder or glue maybe screws ? Go tubeless .I don't want to do this as I do break a spoke.
The tire moved on the rim by 10in backwards or thru acceleration. Ok. This time a small whole on the inne side close to the rim. Rim tape good no ruff edges. But most times I rip next to the stem. Yes have filed smooth.
Is there a way to keep the tire from moving on the rim ? Powder or glue maybe screws ? Go tubeless .I don't want to do this as I do break a spoke.