vrpc
1 µW
- Joined
- Jun 13, 2021
- Messages
- 1
So my BMS on my S5 is damaged and EcoReco support is completely unresponsive. The pack voltage is good (38v) but the BMS output was much lower (28v).
I purchased and installed a new BMS and the scooter now functions... but turns off after about 5 seconds. The original BMS communicated with the throttle through I2C for I am guessing voltage and charge cycles. I am having difficulty finding a replacement or finding a way to disable this feature. Any info would be greatly appreciated.
I see a few options for me. Somehow get an original BMS, 3rd party bms with i2c, or replace the throttle with one that doesn't need i2c.
I purchased and installed a new BMS and the scooter now functions... but turns off after about 5 seconds. The original BMS communicated with the throttle through I2C for I am guessing voltage and charge cycles. I am having difficulty finding a replacement or finding a way to disable this feature. Any info would be greatly appreciated.
I see a few options for me. Somehow get an original BMS, 3rd party bms with i2c, or replace the throttle with one that doesn't need i2c.