Dirkro
10 W
btslo said:hefest said:btslo said:Can we jack up the cadence on the 48v with the opensource firmware? (I saw some options on the wiki but were "experimental", any side effects?)
Asked the same but it looks like there isn't. There are probably two options, one is to get just the 36V motor and replace existing one, another is to run dc-dc boost converter and raise the voltage to 52V.
See here:
https://github.com/OpenSource-EBike-firmware/TSDZ2_wiki/wiki/Features-and-configurations-for-version-0.18.X#11_Various
"Set (2) (EXPERIMENTAL) for the 48 V brushless motor, high cadence mode. Maybe not good for the motor, use at your own risk. Probably only suitable for the 36 V motor."
But not sure if anyone is using this.
I have installed 18.2 on a 36 V motor, The 48 V Option is NOT working on a 36 V engine with 36V batterie.
Option 2 Running well if you are a fan of high cardence.
Option 1 is prefect for me would guiess to have Support until 90 .
Regards
Dirk