JRP3
1 kW
Yes a 48V contactor should work.
Nanjing far driver controllers
- Thread starter j bjork
- Start date
isso777
10 µW
Hi, sorry if I missed this information somewhere in the thread, but is there a comprehensive documentation available for Fardriver controller settings? Particularly interested in the values highlighted in the attached screenshots. Thanks!
Attachments
Hi
If anyone can share their display settings in the fardriver for getting the dkd one lin display working would be great. I've apparently got it wired properly, it's only power and one wire but it does not read any speed or other info. Put oscilloscope on it, looks like it's sending something so figure my settings must be wrong.
If anyone can share their display settings in the fardriver for getting the dkd one lin display working would be great. I've apparently got it wired properly, it's only power and one wire but it does not read any speed or other info. Put oscilloscope on it, looks like it's sending something so figure my settings must be wrong.
Attachments
Sorry if I missed this one but did you get an answer? Mine was at 0 by default, updated to 21 and now my display started working.
Does anyone know how to determine the correct value for speed pulse number?
Okay so I found it here in the manual.
To get speedo to work accurately I had to set speed pulse to 1.
I had assumed it would be as per the number of poles but it seems not.
Attachments
Currawong
100 µW
Hi Guys,
Hopefully a simple question about the PC vs IOS application,
In the IOS application you need to register/bind to be able to change parameters, do you need to do the same using the PC application?
If so what is the process to get the password?
My translation of the manual is not good, does someone have a better translation or explanation?
12.7 Log in:
The generated version software can be set 30 The controller can only modify parameters when the password is entered. Ordinary controllers do not have passwords, and some controllers are factory set according to requirements. 30 Set the password After entering the code, the user can only view the parameters and status. Click Login and enter the correct 30 The parameters can be modified only after entering the password.
Hopefully a simple question about the PC vs IOS application,
In the IOS application you need to register/bind to be able to change parameters, do you need to do the same using the PC application?
If so what is the process to get the password?
My translation of the manual is not good, does someone have a better translation or explanation?
12.7 Log in:
The generated version software can be set 30 The controller can only modify parameters when the password is entered. Ordinary controllers do not have passwords, and some controllers are factory set according to requirements. 30 Set the password After entering the code, the user can only view the parameters and status. Click Login and enter the correct 30 The parameters can be modified only after entering the password.