Search results

Date Relevance Most replies

  1. S

    Cycle analyst v2 problem

    You guys where right again, the connector had some loose wires/ bad connectioins. I contacted CA if he had spare part for the pushbutton. Thanks you all for the great answers !
  2. S

    Cycle analyst v2 problem

    Well i figure out the problem is within the buttons , i unplugged the button and the problem. But now i have also other the display keeps saying i draw like -1000W or -15Amps , anyone has encountered that problem before ? I hope CA can provide me spare for the buttons or i have figure out...
  3. S

    Cycle analyst v2 problem

    thnx for the advice ! I will try it 2morrow.
  4. S

    Cycle analyst v2 problem

    Hi all, I recently have some problems with my cycle analyst. It keep popping/jumping the display automaticly in all kind of modes and mostly it end ups in the setting mode ( Its like if someone pressing the buttons continiously on the analyst). Its very annoying and almost unable to bike...
  5. S

    HS3540 much friction on shaft

    Hey thn the tips so far . I was on a short vacation so i couldt go on with it. So 2night i had some freetime i managed to unscrew , the screws ( the cut in the screws and bigscrewdriver did the job) I only still cant rotor out , any one of you have some advice to take out the rotor. I only...
  6. S

    HS3540 much friction on shaft

    Yes is still the guessing phase , but I did the following : 1 : Unplugged the connector 2 : Try spin wheel no effect still gives friction 3 : put 2 wires together L1-L2 , L2-L3 , L3-L1 all these this combinations gives abit more friction then step 2 4: Put all wires together this gives...
  7. S

    HS3540 much friction on shaft

    Thnx for the tip Guys ! The wheel is now +3 years old. and i think put 10.000km on it. I think indeed there maybe is an internal short , if that could be possible. But know i have to find out the internal short , any suggestion on that. I already figure out opening the front is very hard...
  8. S

    HS3540 much friction on shaft

    hey i dont know if there is shorted phase , if there was shorted phase the motor wouldnt work anymore right ? How do i check if there is a phase shorted Bearing replacment would be hard i think especialy to get the wheel open :(
  9. S

    HS3540 much friction on shaft

    Dear Ebikers. Recently my Crystalite HS3540 motor has a problem , it gives pretty much friction on the shaft. When there is enough power aviable its no problem , but is drains batt pretty fast and also the speed is not optimal because of the friction. But when no power its very hard , to...
  10. S

    74v 20ah Li-Ion battery build

    Being using HK lipo for more then 3 years now ! with very different experiences . I had build 2 packs first was a 6s 6*5ah and the moment i have a 6s 3*10ah. Oke first the pro's 1: The price , i think their is no better price then aviable for a 72V 10ah that hobbyking offers...
  11. S

    cycle analyst speed error ?

    Ty you for advice en response . My CA.2.2 is not a stand alone version its directly connected to the lyen controller. I think the problem is in the spoke or in the sensor, the sensor picks something up and gives me al the weird speeds and therefore is cut of the power. At the moment i...
  12. S

    cycle analyst speed error ?

    My cycle analyst v2.2. When cycle analyst (v2.2) is plugged it sometimes gives me somekind of speed error. When i pull the throtle the speedcounter on the display gives me an error and says iam over 200kph or other weird speeds. There fore the bike is not giving me any power . because the...
  13. S

    BMS Battery Alloy Shell Charger Problems

    yep iam getting 75V on the output , (is configured for 18s) wich component is the voltage regulator ? I checked the 12v volt for the fan , and there i found a problem . When i take as a default ' - ' the blue output wire and i measure the '+' of the fan i see 12V , so why the fan dont start...
  14. S

    BMS Battery Alloy Shell Charger Problems

    Iam from holland. I have pulled the plate of , i can take picture , but tthere doesnt seem anything unusual on it . The weird thing is , that the charger gives an output of 75V but there wont flow any current It wont charge when my battery is on it. the fan also dont start
  15. S

    BMS Battery Alloy Shell Charger Problems

    the led sheens bright when i put my battery on it , and it also when its connnect to the socket 230VAC . No green led Only led 1 is red Led 2 gives no color at all ( red or green)
  16. S

    BMS Battery Alloy Shell Charger Problems

    the led sheens bright when i put my battery on it , and it also when its connnect to the socket 230VAC . No green led Only led 1 is red Led 2 gives no color at all ( red or green)
  17. S

    BMS Battery Alloy Shell Charger Problems

    Recently my bms charger emc-600 is not working anymore . (just a few months old ) only the one red led is on '' the power indicator' I measured on output of 74volt when it on , but when i put my battery on it , the charger wont charge . And there is stil only one red led on ( the power...
  18. S

    29er MTB build

    The regen problem solved , but there is have another problem . My freewheel is already half broke , the wheel makes a weird noise and the lock ring is loose . It was sunrace 11t 9 speed freewheel wicht brand of freewheel do you guys use ?
  19. S

    29er MTB build

    I got the regen working . But i must work on my torque arms setup , because the regen gives me to much stress on my torque arm, ( it moved a litle bit )
  20. S

    29er MTB build

    Well I recieved my programming cable, so hopefully i can get the regen working , does anybody know on wich voltage you must program the regen function for a 18s pack ?
  21. S

    29er MTB build

    I connected the swith/ psuh button on the ebrake . There is also a white wire with a jumper connector on it , that is connected to together to enable regen. I connected Lyen for the problem , when i ordered i didnt ask lyen for the regen . He told me that the default value is set to...
  22. S

    29er MTB build

    The controller is a lyen 12 FET 4110 MOSFET MK2 sensorless Controller LYEN Edition its has got a white wire that must be connected to enable regen , en i connected the push button the brakes. The push button cuts the power to motor, but it doesnt regen . Do i must apply some settings in the...
  23. S

    29er MTB build

    Update , Everythings works really fine but the controller was getting quite hot inside the bag so i placed is outside on the frame. The battery voltages drops pretty fast, so maybe iam must some extra zippy packs to get more range out of the packs , i now have 18s10ah but iam thinking...
  24. S

    29er MTB build

    The 24s bms forn bmsbattery sounds promising . its to bad that they didnt put a metal box around it. I will search the forum if someone has used this unit for 18s lipo setup.
  25. S

    29er MTB build

    The hobbyking medics don't do the job good enough what i excpected that they do. I takes hours for the medic to even drain 1 cel -0.1V. So iam looking for a bms that constant watch my cells an balance them . I also noticed some unbalance in my packs some celss are 4.15V while others are...
Back
Top