Volt Craft
1 µW
Hello to the forum! (this is my first post)
Videos:
Intro (overview):
Playlist: 35KWh LiFePO4 Battery for $2K - full build 28 part series
I recently completed my second build of a 35KWh battery for home home energy storage, so I decided to take the time and video the process and publish it for all of you. I enjoy videos like 'how its made' and learn a lot from seeing how things are done around the wold, so this is me giving back to the community and you can see how one might approach this build in a California garage.
I purchased 3 of these batteries for about $1700 each and am building a battery bank that is larger than 100KWh for a residential home. It is amazing how much prices have dropped, and just how good of quality you can get with a repurposed vehicle battery. In this build I install two JK BMS units and some breakers and then configure the unit and install on a grid tied solar hybrid inverter. I fit this all in the original form factory of the battery module. its a great module, weather tight, with heating/cooling capability (if I needed that).
This is a long form video series, about 28 episodes long. I'm adding as much information as I can learn about CATL, the 302Ah batteries and the engineers and companies that were involved in the original design.
Its a ton of fun for me to make the series. I should have the rest of the episodes edited and uploaded soon. Let me know if you have any questions.
Videos:
Intro (overview):
I recently completed my second build of a 35KWh battery for home home energy storage, so I decided to take the time and video the process and publish it for all of you. I enjoy videos like 'how its made' and learn a lot from seeing how things are done around the wold, so this is me giving back to the community and you can see how one might approach this build in a California garage.
I purchased 3 of these batteries for about $1700 each and am building a battery bank that is larger than 100KWh for a residential home. It is amazing how much prices have dropped, and just how good of quality you can get with a repurposed vehicle battery. In this build I install two JK BMS units and some breakers and then configure the unit and install on a grid tied solar hybrid inverter. I fit this all in the original form factory of the battery module. its a great module, weather tight, with heating/cooling capability (if I needed that).
This is a long form video series, about 28 episodes long. I'm adding as much information as I can learn about CATL, the 302Ah batteries and the engineers and companies that were involved in the original design.
Its a ton of fun for me to make the series. I should have the rest of the episodes edited and uploaded soon. Let me know if you have any questions.
