3d printed frame, carbon wraped

[xadmx]

dont have a clue how this will turn out.
i have made carbon things before but not like this.
this will have 20" wheels, rear hub motor in carbon rims.
not after a 100mph bike just something thats got long range and max or about 20mph.
still printing the parts so will update as i put it together.
frame is printed hollow and 1,5mm thick walls or 2mm when needed.


the frame will have 3mm alloy inserts in the dropouts then wraped with the carbon.

 

[xadmx]

quick print of the front forks to test fit and size. now i can print the ones to be used.

 

[Chambers]

Following - I saw a youtube video of someone doing something similar a few years ago, I've thought about trying it ever since

 

[xadmx]

changed the frame design to make putting thr carbon on a lot easyer. got to glue the stem insert in.
this was only 2 layers of carbon and a quick sand so still have a few more to do.
i cut the back of the frame so i can solt the battery pack and controller in the frame tube.

 

[lufihengr]

Are you using a vacuum chamber with the carbon or just out in the open?