Hi all
I am struggling to get the LCD and the controller working
Its a Bafang BPM2 48V500W Rear Driving BikeConversion Kit
The LCD screen lights up for 1 second and goes dimm, i connected a multi meter to the 48 volt battery poles and i can see a very fast decline in Voltage down to 20 Volt . Sounds worrying to me
As well , i have my problems what cable i should connect to the PAS sensor
The display is a S-LCD3
The controller a S12S 500Watts Torque Simulation Sine Wave Controller
The motor is not doing anything when i turn the trottle
Can someone advice ?
Thanks Billi
I am struggling to get the LCD and the controller working
Its a Bafang BPM2 48V500W Rear Driving BikeConversion Kit
The LCD screen lights up for 1 second and goes dimm, i connected a multi meter to the 48 volt battery poles and i can see a very fast decline in Voltage down to 20 Volt . Sounds worrying to me
As well , i have my problems what cable i should connect to the PAS sensor
The display is a S-LCD3
The controller a S12S 500Watts Torque Simulation Sine Wave Controller
The motor is not doing anything when i turn the trottle
Can someone advice ?
Thanks Billi