Ohmygodlandshark!
100 µW
- Joined
- Apr 24, 2022
- Messages
- 8
Hey! So I'm mostly brand new to this. And most electronics. I've installed a crank case 1500 w in a old steel frame racer, and I've ridden alot of dirtbikes.
Now to my questions.
According to the guy I bought it from this is the Bike: 72v 30 Amp battery, 60 Amp bms.
200 lg cells. 10 series. 20 parallel.
"84 watt gives 60 Amp"
50 cells was changed last service. Along with a new bms from dayli.
4000 w vektor controller. Changed from a 6000 w annoy bikes controller. ( I have it in a box, and it's huge)
8000w cromotor in a 24 inch rim. (This is peak power right ? They will advertise this one as 4000w or something? )
Double rock shock dampers in the back.
Dmn volcano racing shoxs (usd-8)
Gt hub with 20 mm axell.
Shimano slx brakes and Saint 4 piston calipers.
He also said the frame is a " horizon" and It looks slightly better than other Chinese rip off frames. ( I'm assuming it's Chinese by the welds and such)
But ive broken a dirtbike in half some I'm not too confident in this bike.
My questions to the experienced stealth Bomber type bike builder :
Did the original guy choose good stuff ? Any weak links ? If I don't care about range for a day, would it hurt to put on the 6000w controller again ?
I've heard about some little "sine wave " controller or something like that , that supposedly everyone is putting on their bike? So it's less noisy and have a more controllable power down low ? I think I need that. Also he said there's no overheat warning from the hub motor ? Is that really bad ?
My long term goal is to learn this Bike and how to repair and modify it, and in the end, create an easy to use, reliable, turnkey , fun alternative to a gasoline dirtbike/enduro. ( I'm limited to the forrest of my family farm and two local tracks)
Flat to somewhat steep hills, and open pinewood forrests.
I'm already looking to buy a Nyx frame (that's what grabbed my attention years ago.
But I'll install parts for it when I've gotten some experience.
Is 800 usd a fair price for a nyx frame ?
I can upload pictures as soon as I figure it out.
Now to my questions.
According to the guy I bought it from this is the Bike: 72v 30 Amp battery, 60 Amp bms.
200 lg cells. 10 series. 20 parallel.
"84 watt gives 60 Amp"
50 cells was changed last service. Along with a new bms from dayli.
4000 w vektor controller. Changed from a 6000 w annoy bikes controller. ( I have it in a box, and it's huge)
8000w cromotor in a 24 inch rim. (This is peak power right ? They will advertise this one as 4000w or something? )
Double rock shock dampers in the back.
Dmn volcano racing shoxs (usd-8)
Gt hub with 20 mm axell.
Shimano slx brakes and Saint 4 piston calipers.
He also said the frame is a " horizon" and It looks slightly better than other Chinese rip off frames. ( I'm assuming it's Chinese by the welds and such)
But ive broken a dirtbike in half some I'm not too confident in this bike.
My questions to the experienced stealth Bomber type bike builder :
Did the original guy choose good stuff ? Any weak links ? If I don't care about range for a day, would it hurt to put on the 6000w controller again ?
I've heard about some little "sine wave " controller or something like that , that supposedly everyone is putting on their bike? So it's less noisy and have a more controllable power down low ? I think I need that. Also he said there's no overheat warning from the hub motor ? Is that really bad ?
My long term goal is to learn this Bike and how to repair and modify it, and in the end, create an easy to use, reliable, turnkey , fun alternative to a gasoline dirtbike/enduro. ( I'm limited to the forrest of my family farm and two local tracks)
Flat to somewhat steep hills, and open pinewood forrests.
I'm already looking to buy a Nyx frame (that's what grabbed my attention years ago.
But I'll install parts for it when I've gotten some experience.
Is 800 usd a fair price for a nyx frame ?
I can upload pictures as soon as I figure it out.