NeilP
1 GW
Have to admit, I only ever pushed the 5304, not one of these newer motors, but 175 is the phase current he is talking about, not battery current..and we are not even sure if that is a real amount, or merely the controller setting.
Until it gets opened up to check to see if it got toasted, it could still just be a shorted, broken phase wire inside or at the entry point of the axle. Any one single phase wire broken and shorted to the case will show continuity to the stator and case on any phase, since they are all connected at the centre junction of the WYE
Until it gets opened up to check to see if it got toasted, it could still just be a shorted, broken phase wire inside or at the entry point of the axle. Any one single phase wire broken and shorted to the case will show continuity to the stator and case on any phase, since they are all connected at the centre junction of the WYE