shortcircuit911
1 kW
@rumme cool build, I like those tires a lot. I actually read one of your posts a while ago where you talked about going tubeless, very cool.
I haven’t done too much to the bike lately (expecting another kid next weekend) but I did start making some side panels to give the bike a bit of a cleaner look. I made a quick back fender by cutting up some black plastic I had. I ordered a rear fender for a cr50 off of ebay, so hopefully that shows up soon.
I’ve been going back and forth with QS, they’re taking a while to send me an invoice, literally just trying to pay them money and they won’t let me. If all goes well I’ll have the new motor in a month or so. I haven’t been basing much lately as I want to baby the motor as long as possible and have it as a spare.
Last thing I’ve been working on is getting the stock controller cover/enclosure that came with the bike to work with the beefy sabvoton. I ended up sliding the cover down to cover the sabvoton and notched a few areas so that it clears the crank and sabvoton mounting bolts. I still need to make a small bracket for the top and finish the plastic portion that will house all the wiring.
So I don’t think I asked my question clearly above and I want to re-ask. If you look at the picture below you’ll see the hall connections I have. On the motor side there is a white wire for the thermistor, and on the controller side of town there is an empty slot where the thermistor should interface with the controller. Do I need to run the white wire somewhere else? If so, where? I don’t see another connector for it. Any help there would be much appreciated.
I haven’t done too much to the bike lately (expecting another kid next weekend) but I did start making some side panels to give the bike a bit of a cleaner look. I made a quick back fender by cutting up some black plastic I had. I ordered a rear fender for a cr50 off of ebay, so hopefully that shows up soon.
I’ve been going back and forth with QS, they’re taking a while to send me an invoice, literally just trying to pay them money and they won’t let me. If all goes well I’ll have the new motor in a month or so. I haven’t been basing much lately as I want to baby the motor as long as possible and have it as a spare.
Last thing I’ve been working on is getting the stock controller cover/enclosure that came with the bike to work with the beefy sabvoton. I ended up sliding the cover down to cover the sabvoton and notched a few areas so that it clears the crank and sabvoton mounting bolts. I still need to make a small bracket for the top and finish the plastic portion that will house all the wiring.
So I don’t think I asked my question clearly above and I want to re-ask. If you look at the picture below you’ll see the hall connections I have. On the motor side there is a white wire for the thermistor, and on the controller side of town there is an empty slot where the thermistor should interface with the controller. Do I need to run the white wire somewhere else? If so, where? I don’t see another connector for it. Any help there would be much appreciated.