sacko
10 kW
I have order the following;
Bafang 36v 500w Motor
KU123 Controller
26" wheel
I had intended using a 44.44 2s2p lipo (Turnigy 6s 5000) but have the opportunity to run 55.5v (Hyperion 5s 4200mah).
Would anyone recommend this? Or too much for the nylon gears?
There is a 1km hill which is reasonably steep (Pic below shows half the hill)
Stick with 48v or go with 55.5v?
Bafang 36v 500w Motor
KU123 Controller
26" wheel
I had intended using a 44.44 2s2p lipo (Turnigy 6s 5000) but have the opportunity to run 55.5v (Hyperion 5s 4200mah).
Would anyone recommend this? Or too much for the nylon gears?
There is a 1km hill which is reasonably steep (Pic below shows half the hill)
Stick with 48v or go with 55.5v?