cruise control Shenzhen 48V/600W controller

[bra]

Hi have ecrazyman Shenzhen 48V/600W controller I add cruise control to the Controller i put the wires inside like picture A switch is connected between GND cr it works very well.

 

[itselectric]

Hi have ecrazyman Shenzhen 48V/600W controller I can add cruise control to the Controller if yes were I can put the wires inside
tanks for help. the picture is not very good

Here is similar topic
http://endless-sphere.com/forums/viewtopic.php?f=2&t=22484

If the controller had throttle and ebrake wire, you can make it by having a jumper wire from throttle and connect to the cruise control device.

Ken

 

[bra]

cruise control works fine