Direct drive motor fatbike 190mm dropout

[leo3387]

Hi, I will use a Nucular x6f controller on a 26x4 fatbike with 190mm dropout. I need to buy a DD rear hub motor that is compatible with hubsink and statorade.
Anyone can recommend what would be the top 3 motors?

 

[E-HP]

For my riding, I'd get a QS205 in the slowest winding, 6T. I don't need to go fast, and I have very steep hills. I'm not sure if I can stand fat tires, but since that's the criteria. With normal tires, I'd probably go with the 5T.

 

[leo3387]

Thank you.
It is for riding in the city, doing bike deliveries. There is a lot of stopping/accelerating, so juicy/punchy acceleration is important. An easy cruising at 45-50 km/h is needed. The terrain is mostly flat but with a few repeated inclined streets. It will be used for 8-10 hours straight with regular stops, over 100-150km per day.

I find the QS205 attractive overall, except for its 14kg weight, which seems too much.

For my riding, I'd get a QS205 in the slowest winding, 6T. I don't need to go fast, and I have very steep hills. I'm not sure if I can stand fat tires, but since that's the criteria. With normal tires, I'd probably go with the 5T.

 

[E-HP]

Sounds good. I’m going to take a pause and let others chime in case there is additional criteria.