[FS - Burnaby BC or Seattle WA] NEW 26x4 Fat Wheelset; Bafang G62 1000W rear (170mm) + Mulefut 80 front (15x150) - $1249 CAD OBO

[NaCly]

Brand new, never installed 26x4 fat bike wheelset. Built for a project that didn't happen. Moving on to motorcycles.


Rear:

• Bafang RM-G062.1000 geared rear hub motor
• 1000W nominal, ~1500W peak, ~130Nm at the wheel
• 48V/52V compatible, controller dependent
• 8.0 RPM/V winding (the 26"-optimized variant)
• L1019 high-amp waterproof connector on side axle exit
• Built-in clutch, freewheels with no drag when off
• Cassette freehub: HG, 8/9/10/11sp Shimano compatible
• 6-bolt rotor mount
• Dropout: 170mm OLD (not 190mm; please verify your frame fits)
• Laced to a Light Bicycle carbon fat rim, 32h, 3X
• Tubeless tape installed; running tubed currently

Front:

• SRC fat bike hub
• 15x150mm thru-axle (standard fat bike fork spec; fits RST Renegade, RS Bluto, Manitou Mastodon, etc.)
• 6-bolt rotor mount
• Sun Ringle Mulefut 80 rim, 32h, 3X

Tires:

• Vee Tire Co Zig Zag 26x4 whitewall, included
• Currently set up tubed (tubes included)

Compatibility notes:

• The G62 motor lead has the standard L1019 high-amp connector. Pairs out-of-box with Grin Baserunner_L10, ASI BAC2000/4000, or any L1019-equipped controller. Direct-plug with Bafang's own controllers. Any 9-pin Higo (Z910) or Julet controller will need a pigtail.
• Standard hall sensor mapping; no quirks to flag.
• 1000W version is the higher-torque/lower-RPM variant; great for fat snow / sand / climbing. If you want top speed on a 26x4 wheel, the 750W variant is faster.

Not included: Controller, battery, display, throttle, harness, cassette, rotors. Motor only on the wheel.


Reason for selling: Originally bought for a Marino full-sus fat frame project. Selling that frame and the matching RST Renegade fork separately; can bundle.


Logistics:

• Local pickup preferred, Burnaby BC or Seattle WA with a heads up.
• Will ship at buyer's cost; heavy and awkward, expect ~$80-150 in BC, more outside
• Cash, e-transfer, or PayPal G&S (buyer covers fees)

Asking $1249 CAD OBO. Pricing flexible. Bundle discount on the Marino frame + RST Renegade fork if interested in the full project starter.