DMR 20mm hub fitting my forks

[cooljaysquat]

I bought a DMR 20mm hub for my front wheel and I was expecting to be able to lace it up in my front wheel with 13g spokes and have it trued and be set. The hub comes to me with no skewer for me to be able to fasten to my front forks. I took it to a bike shop and was told that the hole is large and takes a bigger skewer and won't attatch to my forks. I know others are using it some how! Is there an adapter or is there a way for me to be able to use it on my bike?

 

[Drunkskunk]

The DRM Revolver 20mm Hub is a 110mm hub, so it will only fit the handfull of forks with 110mm spacing, instead of the normal 100mm. And it uses a 20mm Axle, not a Skewer. The Axle is part of the fork. I have one and have it fitted to a Marzocchi Monster fork.

There are a few kits to adapt a 20mm Axle for a standard bike fork. I found this :http://www.universalcycles.com/shopping/large_image.php?attribute=99650
But that is no garentee that it will work for you.

 

[cooljaysquat]

Thanks for the info. I just bought a a set of nice 110mm spacing forks - RockShox Domain RC Dual Crown Coil 200 Maxle 20 Black. This fork will make the bike look much better too, plus my new hub will fit! I hope the hub will fit. It should right?

This is the one I just bought. This fork will work, right?
http://www.amazon.com/RockShox-Domain-Crown-Maxle-Black/dp/B0044PMW58/ref=pd_sim_sbs_sg_1