• Hello ES! We could use some help to get us past the finish line on building the new knowledgebase for the forum.
    Can you donate? Please see our fundraising page. Thank you!

ETB Bafang Motor Advice M410 / C111 display - New to E-MTB world

lebanator

New here
Joined
Jan 20, 2025
Messages
1
Location
Australia
Hey fellow e-cyclists,

After a week of diving down the rabbit hole of e-MTB research, I finally took the plunge and got myself a VelectriX Ascent Pulse X 29 with a Bafang M410 motor (250W, 95Nm) and the C11 LCD display.

Now I find myself researching eggrider to speedbox. I don't ride on the road and quite nervous in doing so, it will mostly be used on private dirt trails all flat and off-road and I'm quite a stocky build and new to the e-bike world but I'm unclear how to change the 25km/h limit the most easiest way even by 10km/h would be great. I am finding myself pedalling faster than 25 km/h, like all the time

My family own around 20,000km of private farm land including river, don't get me wrong its easy to get on a quad bike and survey but also need to pedalling and get some exercise too.

To be honest, I’m a complete noob at this. I haven't touched a bike seriously since I was a kid, but I’m itching to get back into cycling with this modern tech. I just don’t want to screw up my shiny new toy before I even get to enjoy it. I do not live in the city or have access to people that could help.

Would be keen to hear any recommendations! And if you can throw in some beginner-friendly instructions, I'll be eternally grateful.

Could I just update the display from the bafang C11 to a bafang DPC18 display aftermarket and then it will be fine?
 
Back
Top