Hey guys.. i was asking GNG if they had a 0.35mm lamination version of their mid drive motor..
And the guy at the end of the line told me about a new drive coming out in a few months.. the X1-pro.
Here are some pictures he sent:
View attachment 3
View attachment 1
Me: ( do you have a 0.35mm lam motor )
Them: Dear David,
Our new X1-pro 3000w motor is 0.2mm will be available in about 1-2 months but the thickness of GNG2016 premium motor stator lamination is 0.5mm.
Me: Wow, 0.2mm laminations!!! can you tell me more about this X1-pro?
Them: Yes! We spent a lot on the motor stator design and tooling. It is a 80OD motor.
Overall reduction 1:36.
Our motor is only 2.5kg with all the controller and reduction gear.
There will be two version, one with 2nd stage gear reduction, another with 2nd stage chain reduction. And there will also be different mounting option for 68/73/83/100/120mm bottom bracket.
So that's all the info i have for now, but i wanted to tip off ES...
And the guy at the end of the line told me about a new drive coming out in a few months.. the X1-pro.
Here are some pictures he sent:
View attachment 3
View attachment 1
Me: ( do you have a 0.35mm lam motor )
Them: Dear David,
Our new X1-pro 3000w motor is 0.2mm will be available in about 1-2 months but the thickness of GNG2016 premium motor stator lamination is 0.5mm.
Me: Wow, 0.2mm laminations!!! can you tell me more about this X1-pro?
Them: Yes! We spent a lot on the motor stator design and tooling. It is a 80OD motor.
Overall reduction 1:36.
Our motor is only 2.5kg with all the controller and reduction gear.
There will be two version, one with 2nd stage gear reduction, another with 2nd stage chain reduction. And there will also be different mounting option for 68/73/83/100/120mm bottom bracket.
So that's all the info i have for now, but i wanted to tip off ES...