GT E-drive from Russia

madin88 said:
You russia guys are fearless.. :)
yea- we know :)
btw today I had probably the slowest ride ever http://endless-sphere.com/forums/viewtopic.php?f=6&t=47970&p=843586#p843586
 
hey andreym


which is the correct firmware file for ntc 10k thermistor update for max-e?

in the v1-rc8f firmaware,

there seem to be 2 files, "max-u bin" and "max-1 bin" :?:
 
Falco said:
max-l.bin - native firmware for the max-e
max-u.bin - flashing for adventurers with a loss of guarantee for max-e
Thanks Falco!
That is correct, max-l is a standard firmware and max-u is unlocked one for unlimited current settings in profiles and disabled power limit with voltage more than 92v, however flashing max-u will void warranty and you cannot flash max-l after flashing max-u
 
andreym said:
Thanks Falco!
That is correct, max-l is a standard firmware and max-u is unlocked one for unlimited current settings in profiles and disabled power limit with voltage more than 92v, however flashing max-u will void warranty and you cannot flash max-l after flashing max-u

Hi andreym,
how does this 92V power limit exactly work (does it reduce batt amps, phase amps or both?)
Does it consider battery voltage sag?
 
The limiter will graduately limit phase current from 92 to 98volts accordingly,
so that at 92volts phase current=phase current set at the choosen profile and at 98v phase current will be limited to mininal (almost 0).
As for voltage sag, the controller "see" the voltage at the main board, so when your batteries does sag, controller "see" lover voltage,
in other words, if you charge your battery to say, 96volts, and push the throttle,
than battery sag will cause the voltage drop to say 92volts, you will be able to use all phase current you set at profile.
 
hey there Andreym

i see the charging caps and inductor are "available" on velomastera site, but i have not been able to get any reply from them.

are you able to send them?
 
Inductors:
k-mini.jpg


Price 1000rubles 30A; 1500rubles 70A
 
My friend is little busy now... http://endless-sphere.com/forums/viewtopic.php?f=6&t=47970&start=100#p854117

Bafang, which survived the fire:

[youtube]unPisjNJnKw[/youtube]
 
What is the name of the software you use, the HUD(speed/distance) in the videos, I see you have Android, is there something similar to Iphones?
 
I use DashWare on PC, GPX data got from smartphone by using the "My Tracks"

I'm creating a black video with similar length and putting on it GPS overlay:



The resulting video (black+gps) superimposed on the original source in Adobe Premiere. In the overlap properties exhibited blending mode "lighten"



And now this sequence can be used as one of video lines in other sequences (in montage).



Profit!
 
ivanovlev said:
Now 1300 pelican-case contains a 2600(!) watt-hour of the elements 18650 3.7v li-ion LG ICR18650 D1 3000ma in the configuration 20s12p (80v36Ah) with a total weight of 12kg.


I have two peli 1200 cases on my bike which do have about the same dimensions like the 1300 case you have. I think of put in there 12p 11s and i know the 12p will fit, but i'm not sure if the 11s will do...
Are you able to tell me how wide your 10s pack is at this side?

cheers
 
230x165x70mm with isolation

THe alternative variant of seat (right):



Little longer, than standard, special edition for me ;) I hope, that i can still pedal on this.. this... aggregate :roll:
 
Finally! Russian design/structure has always been harsh.
The new seat post on the right look way better than original one:
file.php

The orange one in the picture look just wrong if you take the design in the consideration. They better make all of the new frames like yours.
 
Back
Top