8fun_fan
10 mW
- Joined
- Dec 6, 2014
- Messages
- 22
Hi, I have a bafang front motor with Hall sensors and a seatpost attached battery. I order a new battery and was working fine with the old seatpost mount. I change the battery attachment aswell, And now the motor is not turning. I am not sure the attachment to the battery is the issue because I check the continuity of the plug to the battery and it is ok. It is leapfrog battery style.
It has a pedal sensor , when you pedal the wheel seems it wants to start turning makes a sound every 2 seconds and just move slightly. Here is a video showing it [youtube]https://youtu.be/e8PzYwg4xiI[/youtube]
I checked the mosfets with ebike.ca instructions and are ok. The hall voltage is ok, but I coundnt check properly the hall phases because the cables are glued to the controller connector .
Any clues? Thanks
It has a pedal sensor , when you pedal the wheel seems it wants to start turning makes a sound every 2 seconds and just move slightly. Here is a video showing it [youtube]https://youtu.be/e8PzYwg4xiI[/youtube]
I checked the mosfets with ebike.ca instructions and are ok. The hall voltage is ok, but I coundnt check properly the hall phases because the cables are glued to the controller connector .
Any clues? Thanks