HXT or Turnigy outrunner?

[HAL9000v2.0]

I ordered from hobbycity.com HXT 80-100 B but received Turnigy 80100-130. Difference as I see form pictures are only in rotor cover and anodizing color. Are there any other difference and which one is better or are they the same but labeled differently? It is still amazing piece. Mechanically very strong but the windings are not so nice. I like the 12mm shaft. Will open it soon and make some pictures.
You can get spark 3mm log by turning it just by hand...

http://www.youtube.com/watch?v=_r5N94AXqgQ

 

[Miles]

Mechanically very strong but the windings are not so nice.

That seems to be the problem with these - poor copper fill...

Rewind it?

 

[HAL9000v2.0]

First I will burn it.
Then I will rewind it like Germans do.
It is very simmilar construction to Plettenberg Predator, even have bigger shaft.

 

[PaulM]

In the picture of the Predator motor, is there really only 3 turns per stator tooth? It appears to be many strands of very fine wire instead of one thick one.

 

[Miles]

Yup. It's a contentious issue.... http://www.rcgroups.com/forums/showthread.php?t=856672

Here's one reference: http://www.flyelectric.ukgateway.net/winding.htm