I fried my controller need help and or advise

[Sadler1983]

So I go my stock on still it will be th first pic second my new one I’m scared to hook up do to I just don’t know if this new controller is a 2 drive dual motor controller but here is my emoko c93 mountain /edirt bike and I got some follow up questions about how to wire it and or splicing it together u will see what I’m talking about on new controller ok first pic is of my baby over half naked but I hope them pic make it but can I run my two motors off a two mode instead of a 2 drive it is a dual motor e-bike that company claims it goes 50 plus mph I an only get it to 40 to 45 please any one who can help that know what thier talking about can help me out

 

[glennb]

Best time to ask questions is before purchases.

Your new controller can only drive a single motor. “Dual mode” simply means it can do so with or without hall sensors embedded in the motor (“Sensorless”).

Back to square one I’m afraid. Perhaps return the new controller. Other option is using two independent controllers.

 

[Sadler1983]

So u can’t tell if it cant run both on the new one are the 2drive and the old one and the new one 2modes are the same or arnt I got it off Temu off a local warehouse in my home state Washington that’s what the question was are as said e-bikes I have a dual motor 1000w each and I asked them a ton of questions lol people are able to get jobs where they don’t know a thing but ya that’s all I wanted to know are they the same dual motor compatible

 

[E-HP]

So I go my stock on still it will be th first pic second my new one I’m scared to hook up do to I just don’t know if this new controller is a 2 drive dual motor controller but here is my emoko c93 mountain /edirt bike and I got some follow up questions about how to wire it and or splicing it together u will see what I’m talking about on new controller ok first pic is of my baby over half naked but I hope them pic make it but can I run my two motors off a two mode instead of a 2 drive it is a dual motor e-bike that company claims it goes 50 plus mph I an only get it to 40 to 45 please any one who can help that know what thier talking about can help me out

Ya sorry I couldn’t read through that.

Anyway, looks like maybe you’re replacing the controller in the second pic with the one in the third pic. The first one is a dual motor controller, which inside is just two controllers, one for each motor. The second controller is made for one motor, but can run both in sensored mode (using the motor’s hall sensors) or sensorless (dual mode). You would need two of them.
Also, trying to pull 120A from your battery when it’s made for 25A will kill your battery pretty quickly.

 

[Sadler1983]

The same 2 drive old one 2 mode new one either way if it only runs one that’s better then none till I can find some who knows what I’m looking for

 

[Sadler1983]

Ok sweet cool thank u so much send it back to Temu Iwill I will then so find another controller with 2 drive

 

[Chalo]

"Dual motor" controllers are two controllers in one case. If I needed to replace one, I'd use two controllers with Y harnesses for battery and throttle.

But if a moped that wasn't designed to be pedaled were the only way I could participate in e-biking, I'd probably give up e-biking in favor of honest motorcycling.

 

[Sadler1983]

Hi hope alls good I have a question I’m having a hard time finding dual drive controller my bikes a emoko c93 last I knew it was a mountain bike/ edirt bike fried my controller I’ve been hunting for weeks know but is it safe to put one of these in so was told 2 mode would work then I found a universal controller. My bike is 2000 W how many watts do I exactly need on that controller and 48 V two but I have more than 2000 I think also 24 or 23 ah what ever that is but what one is safer and cause bare minimum damage or no damage at all or if any damage it’s just till I find a dual drive controller or two drive however it said this one say universal, but also says on the butt end of it too mode

 

[RichardHe]

2 drive controller is not very difficult but you only need 1 for repair I suggest you to buy a new one from your e-bike manufacturer. As the controller need match your cable and display. Otherwise you need kill them all and setup a whole new building based on your motors.

 

[Sadler1983]

Well crap lol and how would I go about that I want it back on the road I just bought a cheap e-bike to get me around and I hate it only cool thing about the new one I have to have a card I have to touch on the screen to deactivate the security system lol only Eason I bought and was going o take it out and put in my emoko c93 then throw it away well take what I can then toss it any bike goes 30 mph is garbage and would u know any one who sells this mythical I think 2dr dual motor brushless controller by chance and the controler they put in the bike I think is 500w it’s a small box with no watts on it to know I’ve read more high ways in the controler is better to use it’s full potential I don’t know. I just got a few years back and I’m on like my 10th bike now I found my favorite one finally but I’m having a hard time finding parts on Temu AliExpress, that Sheena SHEIN guy I don’t know any companies I can think of when It look up, they just show me circuit boards instead of the controller casing too. I just want something that’s gonna get the max efficiency out of the motors and bike itself. Temu it’s like they only have children working in their u ask all the questions and they say ya ya a week later wrong part again I got 6 controler that I can’t use at all can’t send them back till my c93 is fixed because Temu don’t do door pick up and I can’t afford the 7.99 to ship them back from my door new e-bike can’t ride that far to post office lol any advice or company’s that sell 2dr dual motor controler I’m willing to spend 100$ to a 150$ on one and the pick is of bike what it can do ways volts

 

[Sadler1983]

2 drive controller is not very difficult but you only need 1 for repair I suggest you to buy a new one from your e-bike manufacturer. As the controller need match your cable and display. Otherwise you need kill them all and setup a whole new building based on your motors.

• 2 minutes ago

• New
• Add bookmark
• #3

Well crap lol and how would I go about that I want it back on the road I just bought a cheap e-bike to get me around and I hate it only cool thing about the new one I have to have a card I have to touch on the screen to deactivate the security system lol only Eason I bought and was going o take it out and put in my emoko c93 then throw it away well take what I can then toss it any bike goes 30 mph is garbage and would u know any one who sells this mythical I think 2dr dual motor brushless controller by chance and the controler they put in the bike I think is 500w it’s a small box with no watts on it to know I’ve read more high ways in the controler is better to use it’s full potential I don’t know. I just got a few years back and I’m on like my 10th bike now I found my favorite one finally but I’m having a hard time finding parts on Temu AliExpress, that Sheena SHEIN guy I don’t know any companies I can think of when It look up, they just show me circuit boards instead of the controller casing too. I just want something that’s gonna get the max efficiency out of the motors and bike itself. Temu it’s like they only have children working in their u ask all the questions and they say ya ya a week later wrong part again I got 6 controler that I can’t use at all can’t send them back till my c93 is fixed because Temu don’t do door pick up and I can’t afford the 7.99 to ship them back from my door new e-bike can’t ride that far to post office lol any advice or company’s that sell 2dr dual motor controler I’m willing to spend 100$ to a 150$ on one and the pick is of bike what it can do ways volts

Attachments​

• 
  IMG_0717.png
  496.3 KB · Views: 0

 

[99t4]

...Temu...

I got roped into buying some merchandise on Temu. Turns out, it was cheap stuff, not as advertised. I'll probably never buy from them again. You may get lucky.

 

[Sadler1983]

I got roped into buying some merchandise on Temu. Turns out, it was cheap stuff, not as advertised. I'll probably never buy from them again. You may get lucky.

That’s why me and a few others are sueing them that and I guess it’s a law now the Ada is forcing web site apps to have accessibility for those who are impaired hearing reading writing all the good stuff