raylo32
100 kW
I have a TSDZ2 that installed about 3 years ago. Trying to get hold of the temperature issue I just installed the temp sensor on the motor and a pigtail with a connector onto the controller following Casainho's excellent instructions from the wiki. I also have another controlled that I got with a plug and play OSF kit from Electrify. I bought this in late 2019 or early 2020 IIRC. I want to get this ready to swap into the bike by installing a pigtail and connector for the temp sensor... but the wire colors and pinouts are somewhat different. Does anyone here have a detailed connection plan for this? Pics below. Both controllers side by side, old controller with orange throttle wire, new controller with a blue wire where the orange wire was in the old one (and some other differences).