internal optical sensors with 4T wye Astro 3220

[wojtek]

i have just ordered a set from Burtie ...

hopefully this coming week i will have time to install on my 3220 4 turn wye motor.

i will post results however i will need some guidance on what would be best match with this motor..

atm i have one 4115 24 FET from Lyen. Also during the 54xx group order i also went for 24 FET 4110 controller from cell_man as a back up.

But from what i understand 4turn will like more amps than v so 4110 should be more appropriate. (?)

I will try to get to max speed of around 60-65kmh.

Anything else i should be aware of please?

thanks!

 

[Burtie]

I agreed to install the optic board for Wojtek, and took the oportunity to record the procedure with pictures here...

 

[Burtie]

http://www.youtube.com/watch?v=yUx8mwEM2P0&feature=youtu.be
[youtube]yUx8mwEM2P0[/youtube]



http://www.youtube.com/watch?v=NSpt6uJB0xs&feature=channel&list=UL
[youtube]NSpt6uJB0xs[/youtube]





Tested Running for 2 hours on the bench, -No problems


Burtie

 

[Burtie]

reserved

 

[Sharkboat]

Awesome, can't wait to try this! Right now I have more ideas than money. Hopefully that will all change.

 

[panurge]

Hi Wojtec

Any news about about burtie's device with the Astro? What kind of controller have you tried with it?

I would like to try the encoder with a sensored ESC in the near future....I've the same motor....

 

[mwkeefer]

Burtie,

I'm in need of 2 of your parts kits... not sure what I'm putting them into yet, one will be a 3220 and the other either a 3210 or 3215.

I've still got some parts from the last setup but had major issues getting things to fit and stay.

Also, how well does the timing mod / device work?

Could you quote me with FAST shipping to USA for the 2 optical sensor setups and the dial in utility.

Thanks in advance for your assistance !

Regards,
Mike Keefer
mwkeefer@gmail.com
267-303-7050