Large belt reduction resources?

[veloman]

I'm looking for parts to build a belt reduction of 7:1 or so. Power input will be under 1200watts. I'm trying stay as compact as possible too. This will be the first reduction for a setup that will be driving freewheel cranks. Any places I should look for belts, pulleys that could achieve something around 7:1? Motor shaft diameter of 10mm, possibly 8mm option. Thanks

 

[spinningmagnets]

Here is one link from the middle of the pulley resources thread, there are other options there, but these are some of the parts I'm trying out right now (will not have results for a couple months, yet). This link is for the 5mm pitch HTD belts and pulleys that have recently grown in popularity. I have had two shipments from SDP-SI, and they have been very good to order from so far.

http://www.endless-sphere.com/forums/viewtopic.php?f=28&t=8491&start=15#p301680

 

[Ariane]

Hi,

Thanks Spinningmagets i was looking for the same thing as Veloman

Good day!
Black Arrow