Maybe its just i have some settings wrong however-
I've had some trouble with the DIY mini remote, when i full throttle its only about 80% and when braking its set to -120%
Now this can be adjusted in VESC under the PPM tab however, when you turn off the remote without turning off the remote first, the board will shoot forward.
Also, after riding for a few days, it seems to get "out of line" and letting the throttle go to neutral doesn't mean 0% -- which if you do with the throttle trim adjustments on the remote itself cause the VESC to shoot to HEAVY throttle if you his turbulence in your signal or you turn off the remote before you turn off the board.
Any advice @Torqueboards?