Lupulin
10 mW
Hi Everyone,
I have been lurking here for quite a while and I finally got a used ebike off CraigsList. I got a Yuba Mundo v 4 with a 36V StokeMonkey (original left side) Mid-drive. But I have some questions I was hoping the board could help me with.
First off, I don't know what size the battery is. I believe it is an Ezee battery (it is in a bag below the rear rack). The controller has a green 36V sticker on it. I tried looking up the battery dimensions online, but they all seemed to be the same size???
****Edit**** Just had the battery out of its pouch. Happy day, its 36V 14aH
Second, as I was trying to peek inside the battery bag, I pulled the wire out of the red Anderson connector from the controller. I noticed there isn't a 'pin' on the end that has been crimped. Where could I go to get these pins and crimping tool??
Things I need to do in order of importance:
1. Cycle Analyst. I don't have any readout. I don't know how many cycles the battery has or how well it was cared for.
2. New front tire. Current one is pretty shot.
3. New fork. I believe this has the original fork that has had reports of failing when used with a disk brake, which this bike has
4. Bell
5. LED Flashlight. Came with a mount for a small flashlight
6. Rear light
7. New grips
In the future when I have to replace the battery, I would like to upgrade to a 48V system. Would I need to upgrade anything besides the battery and controller??
I'm looking forward to participating more on ES and giving some riding impressions on the Stokemonkey as there isn't too much on the internet that I had found.
I have been lurking here for quite a while and I finally got a used ebike off CraigsList. I got a Yuba Mundo v 4 with a 36V StokeMonkey (original left side) Mid-drive. But I have some questions I was hoping the board could help me with.
First off, I don't know what size the battery is. I believe it is an Ezee battery (it is in a bag below the rear rack). The controller has a green 36V sticker on it. I tried looking up the battery dimensions online, but they all seemed to be the same size???
****Edit**** Just had the battery out of its pouch. Happy day, its 36V 14aH
Second, as I was trying to peek inside the battery bag, I pulled the wire out of the red Anderson connector from the controller. I noticed there isn't a 'pin' on the end that has been crimped. Where could I go to get these pins and crimping tool??
Things I need to do in order of importance:
1. Cycle Analyst. I don't have any readout. I don't know how many cycles the battery has or how well it was cared for.
2. New front tire. Current one is pretty shot.
3. New fork. I believe this has the original fork that has had reports of failing when used with a disk brake, which this bike has
4. Bell
5. LED Flashlight. Came with a mount for a small flashlight
6. Rear light
7. New grips
In the future when I have to replace the battery, I would like to upgrade to a 48V system. Would I need to upgrade anything besides the battery and controller??
I'm looking forward to participating more on ES and giving some riding impressions on the Stokemonkey as there isn't too much on the internet that I had found.