Need help identifying this plug for controller to battery

[koco]

Need help identifying this plug for controller to battery

This male 2 pin plug goes to a 36v mini controller for what I think is a greenbike kit. I might try to find the female that it plugs in to.

Does anyone have an idea what it might be? Sorry about the bad quality.

 

[Ykick]

Your camera focused on the wheel in the background. Try again without anything in the background.

 

[koco]

Improved photo.

I found this drawing online, and the dimensions seem to match, but there is not much info on how to order one. http://www.amphenolltw.com/2012download/2D PDF/01_Circular Connectors/AD-02AFFM-LL6AXX.pdf

 

[The fingers]

Similar to but not quite a banana plug.

 

[cell_man]

That is a Higo or Juliet connector i guess. Your best bet is to get the matching connector with tail, from the same place you bought the kit, or another China based ebike parts supplier, if you want to retain that connector.

However, it would be simpler to just cut the cable and fit a suitable connector instead, maybe an XT90-S. There is no real reason to retain that connector, especially if finding the matching connector tail is a bit of a hassle. Once you get the matching tail, it will still need to be connected to your battery, via connectors, or an in-line splice.

 

[dogman dan]

E bike kit has that connector on the kits, so you can get the pigtail to put on the battery there. But green bike should have them,, even if not shown on the website.

surely by now places like bms battery have that plug? I'm not sure.

I'd just chop it off,, since I put andersons on all my batteries, I'd put andersons on it.

 

[koco]

E bike kit has that connector on the kits, so you can get the pigtail to put on the battery there. But green bike should have them,, even if not shown on the website.

surely by now places like bms battery have that plug? I'm not sure.

I'd just chop it off,, since I put andersons on all my batteries, I'd put andersons on it.

E bike kit did have the pigtail for it. It sells for $15. I ended up using some .093" molex female connectors on there for now. I just didn't want to cut the plug off in case I needed to warranty the controller.