Paderolis
100 W
So I've put the front hub motor problem on hold http://endless-sphere.com/forums/viewtopic.php?f=2&t=61251. I couldn't get it figured out; first I thought it was a hall sensor on the yellow wire and then I thought it was the wire itself due to low voltage. I could not find any breakage in the wire although it was only showing 0.24V, and for the life of me could not get the wire back into the axle hole! I do plan to revisit this project soon!
I installed a rear hub motor (48V 1000W) and took my first ride from work home yesterday. I am very pleased with the performance! I used my 2010 Trek 4300 for the install and I like the look. It originally came with a 100mm with lockout fork but I filed the dropouts too much to make the front hub motor fit, and on my first attempt at a test ride it snapped like a twig! I had a rigid fork installed as a replacement thinking I would be using the FHM, but you know the story. The RHM was bought on eBay and came from Yescomusa.
I installed a rear hub motor (48V 1000W) and took my first ride from work home yesterday. I am very pleased with the performance! I used my 2010 Trek 4300 for the install and I like the look. It originally came with a 100mm with lockout fork but I filed the dropouts too much to make the front hub motor fit, and on my first attempt at a test ride it snapped like a twig! I had a rigid fork installed as a replacement thinking I would be using the FHM, but you know the story. The RHM was bought on eBay and came from Yescomusa.