torker
100 kW
I must say a good mirror. My other recumbent has a mirror that mounts in the end of the handlebar. Maybe I should borrow that since the unpowered bike isn't seeing much use anyway. Next I want a cycle analyst and better batteries..
unless I am mistaken (too often!), the existing CA has a bare minium of slender, slinky, enclosed wires. It is not a...that other make of thang with its heavy, heavy pair of in-out wires.ngocthach1130 said:I want a Cycle Analyst. Although i think Cycle analyst should have a remote display system the module would go near the controller and battery, while the display is near the handle bar. less wire to run from controller to CA
Reid Welch said:unless I am mistaken (too often!), the existing CA has a bare minium of slender, slinky, enclosed wires. It is not a...that other make of thang with its heavy, heavy pair of in-out wires.ngocthach1130 said:I want a Cycle Analyst. Although i think Cycle analyst should have a remote display system the module would go near the controller and battery, while the display is near the handle bar. less wire to run from controller to CA
CA should be larger display for low-vision (old eyes) riders. Would be a nice touch
You just did win the "lottery jackpot": This thread is now raised to honour you and to say "thanks" for all the workoatnet said:Reid Welch said:unless I am mistaken (too often!), the existing CA has a bare minium of slender, slinky, enclosed wires. It is not a...that other make of thang with its heavy, heavy pair of in-out wires.ngocthach1130 said:I want a Cycle Analyst. Although i think Cycle analyst should have a remote display system the module would go near the controller and battery, while the display is near the handle bar. less wire to run from controller to CA
You are correct, the CA is exactly the 'Remote Display ngocthach1130 is wishing for.
CA should be larger display for low-vision (old eyes) riders. Would be a nice touch
![]()
The "Large Screen High Current Model (CA-HC-LS) " should meet your needs. It works fine with low current fine, but it is designed to handles up to 200v for EVs instead of the 100v of the regular CA. I have one of the original large-screen prototypes for ebikes, and use a production CA-HC-LS in my VW Bus EV Conversion:
http://endless-sphere.com/forums/viewtopic.php?f=7&t=8012&start=120#p145458
[youtube]BrkBNopZn-Y[/youtube]
Wow, two people got their wishes on this thread today! Maybe it can work for me too:
"I wish I'd win the lottery jackpot1" :lol: :lol:
-JD
From: Ebikes Information <info@exxxbikes.ca>
To: ReidWelch@netscrape.com
Subject: Re: Just a heads-up, to be sure you know of this thread:
Date: Mon 07/27/09 07:04 PM
Ha hey Reid, no the busy-ness going on on many fronts these days means I rarely get a chance to peruse over on the forums or see what's up, so I now need to count on good folks like you for keeping me in the loop!! Anyways, thanks a lot for sharing the odd thread or story of interest and for putting in the good words. Your posts are usually pretty entertaining too,
Hope your summer is pretty swell. -Justin
On Thu, Jul 9, 2009 at 12:27 AM, Reid Welch <ReidWelch@netscrape.com> wrote:
http://www.endless-sphere.com/forums/viewtopic.php?f=5&t=1708&p=174722#p174722
NO REPLY NEEDED, save your time, guys!
Point: the CA comes up time and time again.
I presume you get automatic alerts whenever "CA" appears in print, anywhere?
But just to be sure you know of that current thread.
Of course, the hyperlink is DOA because I use an ancient webmailer,
and netscrape will never upgrade their software.
No reply Reid
(kills bugs dead, like Raid)
Netscrape. Just the Net You Need.