1. Turn bike on
2. Hold brake lever to engage motor cutoff switch in order to prevent bike jumping forward
3. Push thumb throttle to position wanted
4. Insert cable tie at extreme angle to find the channel, insert all the way till it stops
5. Let go of brake and you're off! ZOOM!!!
6. Use brake to reduce speed or to stop
7. DO NOT FORGET THAT YOU HAVE THE THROTTLE ON when you finish your ride or whenever you let your hand off the brake
8. Remove cable tie until next time you need cruise control
9. If you forget to remove the cable tie when you get home, don't worry - the cruise control rig will not operate until you do the procedure again with bike turned on
There's no "Hi Ho Silver, Away!" early morning accident. That's nice. Be aware, though, that when you're out riding, any time you let off the brake...zoom!
I used a cable tie 5mm wide to fit the channel.
2. Hold brake lever to engage motor cutoff switch in order to prevent bike jumping forward
3. Push thumb throttle to position wanted
4. Insert cable tie at extreme angle to find the channel, insert all the way till it stops
5. Let go of brake and you're off! ZOOM!!!
6. Use brake to reduce speed or to stop
7. DO NOT FORGET THAT YOU HAVE THE THROTTLE ON when you finish your ride or whenever you let your hand off the brake
8. Remove cable tie until next time you need cruise control
9. If you forget to remove the cable tie when you get home, don't worry - the cruise control rig will not operate until you do the procedure again with bike turned on
There's no "Hi Ho Silver, Away!" early morning accident. That's nice. Be aware, though, that when you're out riding, any time you let off the brake...zoom!
I used a cable tie 5mm wide to fit the channel.