Everyone was sure that my problem was the “big 8 (?) pin connector” BUT, one can check the connection by measuring Voltage between pins 1 and 2 on the OP connector (J4) on the LCD135. It will be battery voltage with a good 8 pin connection. I reported this to Kat at To7 but the engineers still wanted me to “flash” the controller, I bought a programming cable, nothing would flash. Then To7 provided me with a replacement LCD135 display. My original was B&W but the replacement is color. Now, with the replacement display, my DM02 is working pretty well, but there is a lot to learn!
ToSeven DM01 Set Up Questions
- Thread starter appaholic
- Start date
