Hi Ypedal,
Sorry to jack your thread, but I was wonder if you can help me with my problem. I've read many of you posts on here and your website and you are very knowledgeable on lipos. I had PM you regarding having the same setup but with 12S2P and that I was not able to turn the motor with my controller. Now, I have another serious issue. I don't know what has happened, but it seems that all my battery is dead now. A couple of weeks ago, I was able to to connect the 12S2P that output 45V. I had left the battery connected and now all four of my 6S packs are swelled up and not producing any voltage, not even powering up the CA. I tried even disconnecting everything and plugging into a battery medic and it doesn't power it either. I've tried charging in 12S2P and 6S separately but it was not able to charge, it state "no control" and when it's doing a battery check, it only see one cell.
Any insight or suggestion to get the battery back to normal? Attached are pictures of my set up and thanks in advanced.