grumpygaijin
1 mW
- Joined
- Apr 1, 2018
- Messages
- 15
I have a mac motor that I bought years ago from Paul at EM3EV. Like many people I've put thousands of trouble-free miles on it. Right up to last week.
I hit a curb, that I've hit hundreds of times before (without problem), and the motor stopped working.
I have a CA which showing the PAS speed sensor working normally, but the wheel doesn't provide power at all. If I stop pedaling, then start again, it WILL begin to apply power for 1 - 2 seconds, but then it stops again.
I checked all the wire connections (thought it might be a broken wire), I took the motor off and apart to see if I could visually see anything ... but to my inexperienced eyes, I didn't see anything amiss.
Any ideas on what it might be? OR How I might go about diagnosing the problem?
I hit a curb, that I've hit hundreds of times before (without problem), and the motor stopped working.
I have a CA which showing the PAS speed sensor working normally, but the wheel doesn't provide power at all. If I stop pedaling, then start again, it WILL begin to apply power for 1 - 2 seconds, but then it stops again.
I checked all the wire connections (thought it might be a broken wire), I took the motor off and apart to see if I could visually see anything ... but to my inexperienced eyes, I didn't see anything amiss.
Any ideas on what it might be? OR How I might go about diagnosing the problem?