karstensson
10 mW
- Joined
- May 23, 2022
- Messages
- 21
Hello,
I am struggling on understanding how the max speed for my hub-motor works when it's controlled by a controller with the following open source software: https://github.com/EBiCS/EBiCS_Firmware
In the firmware the current is set to 15A and max speed to 255 km/h.
Still the wheel only spins up to roughly 25 km/h, even when its spinning freely (at this time the current is 0.5A).
Any suggestions on where this limitation could be? Is it really that the motor has reached it max rpm?
It is a bafang 250 w motor
I am struggling on understanding how the max speed for my hub-motor works when it's controlled by a controller with the following open source software: https://github.com/EBiCS/EBiCS_Firmware
In the firmware the current is set to 15A and max speed to 255 km/h.
Still the wheel only spins up to roughly 25 km/h, even when its spinning freely (at this time the current is 0.5A).
Any suggestions on where this limitation could be? Is it really that the motor has reached it max rpm?
It is a bafang 250 w motor