usb ttl readout settings of Lyen controller?

[OlaGB]

Is it possible to do a readout of the controller setup, as it is programmed from before?
Without having the saved .asv file?

Im trying to, but i can only find info about flashing, and nothing about readout.

 

[Ykick]

I don't think so. In the past before I was more comfortable with the utility I would pester Edward for a copy of my .asv before I messed with any settings. Probably overly cautious on my part - it's really not that big of deal.

Maybe explain your setup and what you wish to accomplish and folks can offer some parameters?

 

[aaannndddyyy]

Is it possible to do a readout of the controller setup, as it is programmed from before?
Without having the saved .asv file?

Im trying to, but i can only find info about flashing, and nothing about readout.

These page`s might help you.

http://lyen.com/Software/

http://shelbyelectrobike.blogspot.co.uk/2011/01/ebike-controller-tuning-with-parameter.html

https://sites.google.com/site/shelb...ike-controller-tuning-with-parameter-designer

 

[OlaGB]

Thanks guys

Yes, i see a file i probably have in my controller, a 123077 with 3 speed. Ill ask Edward for my exact file anyway then.
But if you can not readout what the settings are, how do you know that the flash worked out?

If the file ive got is the same as i found on that page, my phase current is set at 80A, and batt at 30A..
I`m going to run a HS3540 from 18s lipo on a 26" wheel full susp bike, and want the most out of the motor/controller. I was thinking more like 40A "rated" current?

Current limits and cut off setings can be done from my CA v3, so thats not so important i guess.