What is the name/model of the red tip connector?

[jtonon89]

Hello everyone! I am new to this site, so hopefully I am posting this in the correct forum. I was sent a new hub motor core to replace a defective unit. The new core has a 9-pin red tip whereas my original had a black tip. I know my original is a z910, and the red tip is similar, but thicker. Any ideas as to what the model number or connector number is for the red one? I am trying to see if an adapter is available to use the motor in the future if need be.

 

[offGridDownUnder]

Does this new one fit into the same socket? It may just be a variation in manufacturing.

Is the pn-out obviously different?

 

[jtonon89]

The pins are the same, just thicker. The red male will not fit into a black female z910.

 

[Slippy One]

It's clear the black one was getting hot so they probably upgraded the cable from the controller and motor. Email them and ask for the controller to motor female cable. If it's a proprietary/water proof controller and not one of those JST output ones, then you'll need a new controller to match the new cabled motor. Hope this makes sense.

 

[amberwolf]

I'm nearly certain another thread within the last couple weeks just had this connector / cable on there, but can't find it ATM. it was a prebuilt bike they were getting replacement parts for as well; a damaged motor core I think.

 

[frederikmoeller88]