Wiring diagram for NCM ASPEN rear hub

[Shane Howlett]

Can anyone help me with this problem. I have red black white blue green yellow thin wires going to the circuit board and on the circuit board are the letters a b c and s. Can you please help me with this.

 

[amberwolf]

Can anyone help me with this problem. I have red black white blue green yellow thin wires going to the circuit board and on the circuit board are the letters a b c and s. Can you please help me with this.

What specifically is your problem? What is "the circuit board"? What are the wires from, and where do they go? What are you trying to do, specifically?

Be as complete and specific as possible, so that we can help you.

(anything we might say now would be a wild guess).

 

[E-HP]

Can anyone help me with this problem. I have red black white blue green yellow thin wires going to the circuit board and on the circuit board are the letters a b c and s. Can you please help me with this.

The blue green and yellow are likely hall sensor wires, one for each phase; the red and black are 5V and ground; and the white wire may be a speed sensor wire (could be temp sensor, but the "s" may be a clue).