TECH_GEEK10
10 mW
- Joined
- Apr 5, 2015
- Messages
- 23
I have a new bike build I am setting up with a cycle analyst 3, grin phaserunner 6, std wind grin rear all axle hub motor, erider torque sensor, 72v 20ah 80A battery, 400w dc-dc converter powering ca3. I have finished assembling it and it spins the wheel when unloaded, but when I ride it I think the ca3 resets. The dc-dc converter says that as power is going to the motor, the more goes in the more the ca3 draws. I've seen it go to 400ma at times, maybe more. the ca3 is hooked up to run on 12v from the dc converter and has a 200v 1000uf capacitor on the 12v out put to smooth it. Any ideas why it is resetting when I apply power? My guess is something is over loading the ca3 's power supply. I know at 12v it is only able to supply like 750ma or something.
Last edited: