GavilanButler
100 µW
- Joined
- Jul 10, 2017
- Messages
- 8
I have a bafang geared rear hub motor in a fat bike. Recently while riding the throttle stopped working but I already had a new controller in the way so I didn't worry about it too much. The old controller had a modified shunt. So after installing the new controller the motor still won't work, I've tried 2 different controllers, 3 different displays, 2 different throttles. I tested the phase wires from the motor on my tester and multimeter and they seem fine, except the wheel has a lot of resistance when I roll it backwards. Does any body have any ideas what could be going on?